public:rocscience_product_installation_guide

Aquesta és una revisió antiga del document


aquest enllaç Once you downloaded it, extract the zip file and you will have a folder like this one:

Execute the rss1056j10s.exe file. And it will pop up the following window:

Press the Next button, then in the next window press Yes. Then you will see a window, where you will be able to chose where to install the program, you can leave as it is and just click the Next button, the window will look like the following picture: Then it will ask which features you want to install, all of them are selected as default so you can just click the Next button. The installation process will start by installing the different components your computer needs for the program's functionation. Click Next whenever it is asked until the window showed in the next picture: Click the Finish button, the window will close as the installation will have finished and it will open a new one in the File Explorer showing the different folders of the program, one for each feature.

If your computer is not connected to a UPC network you will have to follow these steps too.

  1. You will have to install the service UPCLink. In order to have it installed you will have to follow this guide.
  2. Once you have it installed and activated you will have to go to the Rocsience folder and select the Sentinel Admin Control Center as shown in the following picture:
  3. In the left pane click on Configuration and then select the Access to Remote License Managers tab. Check the Allow Access to Remote Licenses and the Broadcast Search for Remote Licenses checkboxs. And type llic-camins on the Remote License Search Parameters field.
  • public/rocscience_product_installation_guide.1522855255.txt.gz
  • Darrera modificació: 2018/04/04 17:20
  • per daniel.gallardo.amores